• Two Zones Design PCT Aging Test Chamber

Two Zones Design PCT Aging Test Chamber

PRODUCT DISPLAY


Application:

Pressure Accelerated Aging Test Chamber (PCT) is widely applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.



Safety device:

1. Safety device for the pot: If the inner box is not closed , the machine can not start
2. Safety Valve: When the inner box's pressure higher than the machine's undertake value, it will self-relieve.
3. Double overheat protection device: When inner box's temperature is too high, it will alarm, and Automatic cut off the heating power.
4. Cover protection: The inner box's cover is made of aluminum alloy, can protect the worker from scald.



Features:

1. Automatic adding water function, and automatic filling water upon the water short storage while testing.
2. Automatic operation to test process finished, easy to use.
3. Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.
4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.
5. Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.
6. Water device is automatically discharge not saturated steam in order to achieve the best steam quality.
7. A integrated silic gel door gasket, air tightness is very good, and long operation life.
8.The inner box is mirror-polished , graceful and non-pollution


Technical Parameters:


Model PCT - 25 PCT - 35 PCT - 45 PCT - 55 PCT - 65
Internal Dimension
Φ×D (mm)
300×250 350×450 450×550 550×650 650×750
External Dimension
Φ×D (mm)
750×1200×800 800×1250×800 900×1380×900 1050×1550×1100 1200×1700×1250

Temperature

Range of

Saturated

Steam(Operating

temperature)

(Temperature Rangeof Saturated Steam:100℃~135℃) ,Temperature Range: 120℃,100Kpa/133℃  200 Kpa;(143℃ is special order)

Relative

Pressure/

Absolute

Pressure

Relative pressure: display values  indicated on the  pressure gaugeAbsolute pressure: Value that add 100 Kpa based on display values indicated on the  pressure gauge (The

actual value in the inner box)

Comparison

Table of

Temperature,

Humidity ,

Pressure of

Saturated Steam

Humidity of Saturated Steam 100%RH saturation steam humidity

Steam

Pressure

(Absolute

Pressure)

101.3Kpa +0.0Kg/cm2 ~ 2.0Kg/cm2 (3.0Kg/cm2 is special standard)
Recursive Device Steam Natural convection circulation
Safety Protective Devise

Water short storage protect, over pressure protect. (have automatically/manual water

replenishing, automatically discharge pressure function )

Accessories Two layers  stainless steel plate
Equipment Capacity(L) 17 43 87 155 250
Powder AC 220V, 1∮ 3  Lines ,50/60HZ ;



Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case. 

Packing Detail:

Temperature Chamber Calibration/ Temperature Humidity Test Chamber

Our Services

Warranty: one year free warranty for whole set machine,lifelong time maintainance.

After-sale service: feedback within 8 hours after get the call or email.

Service:OEM service,Design service,Buyer lable service.

Exhibition:

Temperature Chamber Calibration/ Temperature Humidity Test Chamber

Company Information

Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Programmable Constant Temperature Humidity Test Machine is our star products , and we had obtained the CE certification for this machine .

Temperature Chamber Calibration/ Temperature Humidity Test Chamber

FAQ

1. Are your company a trading one or a factory?

Factory ,28 years focusing on test instruments field,4 years exporting experience.

2. After an order is placed, when to deliver?

Generally about 20 days,  If  we have finished products, we can arrange shipment within 3 days.

Please be aware that our production lead times depend on specific items and item quantities.

3. What about the warranty with after - sales services?

12 months warranty.

After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

4. What about the services and product' quality?

Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.


If you need more information about PCT Test Chamber, please don't hesitate to send your enquiry, we will support more information for your reference.

CONTACT US

Tel: +86-(0)769-23164266

E-mail: Marketing@aslitesting.com

Add.: Building C,JinHui Industrial Park, LiXin town,East City district 523125,DongGuan City,China

FOLLOW US

Copyright © AI SI Li (CHINA) TEST EQUIPMENT CO., LTD. All Rights Reserved | Sitemap
Technical Support: Yophoo studio

CONTACT US