• low humidity drying chamber walk in test room

low humidity drying chamber walk in test room

PRODUCT DISPLAY


low humidity drying chamber walk in test room

 

 

Product Description

1 Product Name 

1-1 Product Name: walk-in temperature test room

 

2 Main Technical Parameters 
2-1 Dimension: According to customer's requirements
2-2 Material : SUS#304ss
2-3 Temperature :-40°C~150°C (according to customer's requirements)
2-4 Temperature Indication Resolution: ±0.1°C
2-5 Temperature Control Accuracy: ±0.5°C
2-6 Temperature distribution uniformity:±2°C
2-6 Humidity: 20%~98%R.H (according to customer's requirements)
2-7 Humidity Indication Resolution: ±0.1%R.H
2-8 Humidity distribution uniformity: ± 5.0%R.H

3 Air Supply Systems for Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room
3-1 Air Cycling Device: centrifugal fan, externally installed motor drive
3-2 Heating Mode: wire heaters made of a material called Nichrome; PID & SSR control
3-3 Cooling Mode: air/ water cooling
3-4 Humidification Mode: Stainless steel steam humidification; water purifier is provided for automatic water supply while being connected to the chamber
3-5 Dehumidification Mode: by compressor& de-humidify device





4. walk-in temperature room constant humidity & temperature chamber construction

4-1 Console Model Chamber: 
4-1-1 The workspace is located at the left side or as to the user requirements; 
4-1-2 Refrigeration unit cabinet located in the right side; 
4-1-3 Electric control part is placed in the refrigeration unit cabinet, with operation panel on the front Chamber exterior is made of cold rolled steel with powder-painted, interior is stainless steel SUS304 #; 
4-1-4 Thermal insulation material is flame retardant polyurethane rigid foam, of 100-150mm thickness.
4-2 Refrigeration Unit Cabinet:
4-2-1 Located in the right side of the chamber, and refrigeration compressors are installed on its frame, 
4-2-2 Special door for maintenance & repair is provided. 
4-2-3 Acoustical boards are used for lowing noise to maximum limit.
4-3 Chamber door:
4-3-1 Single door or double door, or according to customer’s requirement
4-3-2 Silicon rubber is used for high sealing effect, high / low temperature resistance, anti-aging, and good Sealed performance.
4-4 Lighting Device: two interior lights of 12W/36V, moisture-proof & explosion-proof, can be directly manual switch controlled from the outside.
4-5 Chamber Bottom: 
4-5-1 Height distance to the floor is 200mm; chamber base board is slightly slant with drain hole for letting out the condensed water. 
4-5-2 Interior chamber floor contains many stiffeners, to enable the floor load capacity ≥500Kg / m2, wheel impact ability≥1MT; 
4-5-3 Movable entry ramp is provided. 


Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room

5 Measuring and Control System :
5-1 High-accuracy platinum resistance is used for temperature and humidity measurement.
5-2 Central Control Unit: 
5-2-1 LCD touch screen controller; 
5-2-2 Machine conversational mode is used for control system; 
5-2-3 Two lines of input & two lines of output control mode for controlling temperature and humidity separately; Can display set point, program curve, working time, and working condition of heaters, refrigeration units & fan.
5-2-4 Test procedure automatic operation and PID parameter self-tuning function; 
5-2-5 Can automatically combine the subsystem like heating system, humidification/dehumidification system, refrigeration system, circulation fan, super temperature alarming to operate, to ensure high quality of the whole temperature/humidity control system; 
5-2-6 Control system has automatic self-checking, self-diagnosis, fault display and alarming function.

6 Technical Documents & Accessories:

Operating & maintenance manuals, warranty Cards, instrument instruction manual, communication software, etc.;

Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room

Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room

Our Services

Warranty: one year free warranty for whole set machine,lifelong time maintainance.

After-sale service: feedback within 8 hours after get the call or email.

Service:OEM service,Design service,Buyer lable service. 

ASLI Door to Door Service:

Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room

Company Information

Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room is our star products , and we had obtained the CE certification for this machine 

Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room

 

FAQ

1. Are your company a trading one or a factory?

Factory ,28 years focusing on test instruments field,4 years exporting experience.

 

2. After an order is placed, when to deliver?

Generally about 20 days,  If  we have finished products, we can arrange shipment within 3 days.

Please be aware that our production lead times depend on specific items and item quantities.

 

3. What about the warranty with after - sales services?

12 months warranty.

 

After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

Relative Product:

Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room Welded / Modular Climatic Walk in Chamber/Climatic Chamber Room
Temperature Humidity Machine Salt Spray Test Machine High Frequency Vibration Table

CONTACT US

Tel: +86-(0)769-23164266

E-mail: Marketing@aslitesting.com

Add.: Building C,JinHui Industrial Park, LiXin town,East City district 523125,DongGuan City,China

FOLLOW US

Copyright © AI SI Li (CHINA) TEST EQUIPMENT CO., LTD. All Rights Reserved | Sitemap
Technical Support: Yophoo studio

CONTACT US