• Programmable Climatic Thermal Shock Test Instrument

Programmable Climatic Thermal Shock Test Instrument

PRODUCT DISPLAY

Application: 

Programmable Climatic Thermal Shock Test Instrument is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement. 


  Programmable Climatic Thermal Shock Test Instrument for Electronic Products

Thermal Shock Test Instrument technical parameters: 
Model  TS-42(A~C) TS-80(A~C) TS-150(A~C)
Internal Dimension  
WxHxD ( mm)
400x350x350 500x400x400 600x500x500
External Dimension  
WxHxD (mm)
1400x1800x1400 1550x1950x1550 1600x2000x1700
Temperature Recovery Time /
 Conversion Time
≤5min/≤5sec 
Control Accuracy /
 Distribution Uniformity
±0.5ºC/±2ºC
Internal and External Material Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated.
Insulation Material High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials
Mechanics P.I.D+S.S.R+ Micro-computer balanced temperature control system 
Cooling System Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type
Security Protection Devices Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm

Accessories
viewing window(special order)
Compressor French 'Tecumseh' Brand, Germany Bizer Brand
Power AC220V 1  3 lines ,50/60HZ, AC380V 3  5 lines ,50/60HZ
Weight (Approx) 450 600 750


thermal shock test chamber features: 
1.It is divided into three zones: high temperature zone, low temperature zone, and testing  zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
 
Pictures for Reference:
Programmable Climatic Thermal Shock Test Instrument for Electronic ProductsProgrammable Climatic Thermal Shock Test Instrument for Electronic Products
Programmable Climatic Thermal Shock Test Instrument for Electronic Products

Customer Visit ASLI
Programmable Climatic Thermal Shock Test Instrument for Electronic Products

Saftey device:
1. With no-fuse protection switch
2. Control system with phase sequence protection and low voltage electrical protection.
3. With over-heat protection switch.
4. Over load protection device for refrigeration compressor.
5. Refrigeration compressor high and low voltage protection switch.
6. Refrigeration compressor over oil pressure protection.
7. Lack of Anti-phase protection system.
8. Overload protection for circulation fan motor.

CONTACT US

Tel: +86-(0)769-23164266

E-mail: Marketing@aslitesting.com

Add.: Building C,JinHui Industrial Park, LiXin town,East City district 523125,DongGuan City,China

FOLLOW US

Copyright © AI SI Li (CHINA) TEST EQUIPMENT CO., LTD. All Rights Reserved | Sitemap
Technical Support: Yophoo studio

CONTACT US